Features

• Installation Ease
• No modification of the door or jambs
• Plugs right into a regular 115 vac wall outlet
• Complete instructions are packed with every unit
• Virtually maintenance free
• Fits in most interior and some exterior door applications
• Left and right hand units are available (hand can be changed in the field in a matter of minutes)
• Low profile model, for limited room above the door
• Unit opens and closes the door
  
  
• An Array of Companion Controls (wired or wireless):
• Push Plate Wall Switches
• Push Button Wall Switches
• Coded Radio Transmitter/Receiver
• Keyless Entry Systems
• Electric Door Lock (Strike)
  
  
• Built in Safety Features:
• The door can always be opened manually from either side (although a key may be required)
• If the door meets an obstruction during the opening cycle, the friction clutch will slip, timeout and close
• Thermally protected drive motor
• Adjustable door hold-open time (0 - 30 sec.)
• Auto close feature
• Many built in logic features (for example, door can be opened manually and close automatically)
  
  
• Technical Information - Model 2300 Residential Door Opener
• Operation: Electro-mechanical. Unit opens & closes the door (no closer needed). Seven second cycle time. Adjustable Timed Hold Open feature for 0 to 30 seconds, or a hold open that requires a signal to close.
• Physical application: Jamb-mount, or inverted mount; door mount.
• Power: Requires 115 vac 60hz 3 amp service to receptacle box
• Material/Finish: Painted welded steel frame. ABS plastic housing.
• Motor: 115 vac 60hz permanent split capacitor, thermally protected
• Activation: Touch plate, push button, push plate, radio transmitter, mats, or any momentary dry contact signal
• Dimensions: 12 3/4" x 6" x 3 1/2"
• Weight: 10 pounds
  
  
• Specification for Power Access 2300 Residential Door Mount Door Opener:
• Provide Power Access Corporation Model 2300 residential door opener, shall comply with ANSI Standard A156.19-2002
• Standard Power Assist and Low Energy Power Operated Doors.
• The automatic door opener shall be electro-mechanical and mounted on the pull side of the face of the door.
• The operator clutch arm assembly shall be attached to the door frame above the door and shall open and close the door.
• The arm linkage shall be driven by a fractional horse power gear motor and take approximately seven (7) seconds to open and seven (7) seconds to close this fixed speed to accommodate slower moving disabled traffic.
• Clearance behind the opened door must be at least 3" to permit a full 90 degree opening of the door.
• The unit shall have a friction clutch so the door will stop when it meets an obstruction on the opening or closing cycle.
• The door shall be able to be opened and closed manually.
• A setting is available so the door shall be able to be opened automatically and remain open until a second signal is transmitted to close the door.
• The unit has a built in radio receiver to receive a remote radio activate signal to open the door.
• The operator can be wired directly to an electric strike (lock) to cause a strike release when the unit gets a signal to open.
• The operator requires 115 volt 60 Hz 3 amp service to accept the nine foot power cord with a 3 prong plug.
• Operators shall have a gray powder painted welded steel frame and fire retardant acrylic/PVC thermoplastic cover (meets UL 94V-0).
• The operator shall be mounted according to drawings and instructions provided with each unit.
  
  
• Specification for Power Access 2300 Residential Jamb Mount Door Opener:
• Provide Power Access Corporation Model 2300 residential door opener, shall comply with ANSI Standard A156.19-2002
• Standard Power Assist and Low Energy Power Operated Doors.
• The automatic door opener shall be electro-mechanical and mounted in an inverted manner to wall above the door frame on the push side of the door.
• The clutch arm assembly shall be attached to the face of the door pushing the door open and pulling the door closed.
• The arm shall be driven by a fractional horse power gear motor and take approximately seven (7) seconds to open and seven (7) seconds to close this fixed speed to accommodate slower moving disabled traffic.
• Clearance behind the opened door must be at least 3" to permit a full 90degree opening of the door.
• The unit shall have a friction clutch so the door will stop when it meets an obstruction on the opening or closing cycle.
• The unit shall have an adjustable hold open feature of zero to thirty seconds.
• The door shall be able to be opened and closed manually.
• A setting is available so the unit shall be able to be opened and remain open until a second signal is transmitted to close the door.
• The unit has a built in radio receiver to receive a remote radio activate signal to open the door.
• The operator can be wired directly to an electric strike (lock) to cause a strike release when the unit gets a signal to open.
• The operator requires 115 volt 60 Hz 3 amp service to accept the nine foot power cord with a 3 prong plug.
• Operators shall have a gray powder painted welded steel frame and fire retardant acrylic/PVC thermoplastic cover (meets UL 94V-0).
• The operator shall be mounted according to drawings and instructions provided with each unit.