Features

• Handi-Grip portable grab bars for assistance anywhere in your home or while traveling. The strong suction adheres to most smooth surfaces. Because the Hand-Grip portable grab bars are not screwed into the surface, they are perfect for renters, traveling or visiting. You can easily attach a Handi-Grip portable grab bar to marble, glass or tile, surfaces that may be damaged by drilling holes.
  
  
• Handi-grip portable grab bar consists of two suction cups with release levers and a grab bar. The suction housing and bar are high tensile plastic components, suction pads are natural rubber and all metal parts are stainless steel.
  
  
• Due to the vacuum suction generated by the discs, the grab bar can only be attached to smooth and non-porous surfaces, which are pore- and steam-tight, dry and free of oils and grease. On rough or porous surfaces, the vacuum hold diminishes or does not exist at all. All tiles are not necessarily smooth and steam-tight, test your surface first. Using the grab bar under water or in extreme temperatures (such as a sauna) reduces the suction power. The minimum area for each suction cup for adhesion is 5”x’5”. The use of Handi-Grip portable grab bar is not recommended on dry wall.
  
  

• Portable, quickly and easily installed and removed

  Large lever for easy release

  Telescoping bar for one or two handed grip

  Easily attaches to most smooth surface
  
  

  Components: Handi-grip portable grab bar consists of two suction cups with release levers and a telescoping bar. The suction housing and bar are high tensile plastic components, suction pads are natural rubber and all metal parts are stainless steel.
  
  

  Overall Length 25-3/4" To 30-3/4"

  Length Of Grab Area 15-3/4" To 20-5/8"

  Length Center To Center Of Sution Cup 21.5" To 26.25"

  Diameter Of Suction Cup 4-5/8"

  Outer Diameter Of Bar 1-1/4"

  Diameter Of Inner Telescoping Bar 1"

  Height Of Bar 3"

  Height Of Suction Cup Housing 1"

  Weight 2.25 lbs.

  Weight Capacity 130 lbs.