Features

• Handi-Grip portable grab bars for assistance anywhere in your home or while traveling. The strong suction adheres to most smooth surfaces. Because the Hand-Grip portable grab bars are not screwed into the surface, they are perfect for renters, traveling or visiting. You can easily attach a Handi-Grip portable grab bar to marble, glass or tile, surfaces that may be damaged by drilling holes.
  
  
• Handi-grip portable grab bar consists of two suction cups with release levers and a grab bar. The suction housing and bar are high tensile plastic components, suction pads are natural rubber and all metal parts are stainless steel.
  
  
• Due to the vacuum suction generated by the discs, the grab bar can only be attached to smooth and non-porous surfaces, which are pore- and steam-tight, dry and free of oils and grease. On rough or porous surfaces, the vacuum hold diminishes or does not exist at all. All tiles are not necessarily smooth and steam-tight, test your surface first. Using the grab bar under water or in extreme temperatures (such as a sauna) reduces the suction power. The minimum area for each suction cup for adhesion is 5½x5½x5½. The use of Handi-Grip portable grab bar is not recommended on dry wall.
  
  

• Portable, quickly and easily installed and removed

  Large lever for easy release

  Easily attaches to most smooth surface
  
  

  Components: Handi-grip portable grab bar consists of two suction cups with release levers and a telescoping bar. The suction housing and bar are high tensile plastic components, suction pads are natural rubber and all metal parts are stainless steel.
  
  

  Overall Length 12.75"

  Length Of Grab Area 3.75

  Length Center To Center Of Sution Cup 8.5"

  Diameter Of Suction Cup 4-5/8"

  Outer Diameter Of Bar 1-1/4"

  Height Of Bar 3"

  Height Of Suction Cup Housing 1"

  Weight 1.5 lbs.

  Weight Capacity 130 lbs.